I was wondering of a recommended source to download the Service Tool V4720 for my printer. The program is ready for use to reset your printer. After we will sent key file and input to same folder 6. Send back via your Hardware ID Email to get key file 5. Open extracted folder and run ST4905.exe 3. Tidak Perlu ke Service Center CANON! SUPPORT SEMUA CANON SERIES TERLENGKAP.
After this, close the cartridge door then release the Power button. Plug the Power cable back while still holding the Power button. Next, open the cartridge door then press and hold the Power button. Next, to reset the cartridge ink counter, make sure the printer is off then unplug the Power cable and the USB cable from the printer. Now, turn off the printer by pressing the Power button again. After this, press the Power button twice. Now, press the Stop/Reset button four (4) times. Wait about thirty (30) seconds or until the LED shows without quotes “0”. Next, release the Stop/Reset button then press it twice and then release all buttons. Next, press and hold the Stop/Reset button while pressing the Power button then hold both buttons. If this doesn’t work, try the third method. After this, you will be able to continue printing under the “ink out” condition. You should see the blinking ink level/power light go steady after a few seconds.
Now, press the Resume button five (5) times then release the Power button. After this, release the Resume button but continue holding the Power button. Press and hold the Resume and Power buttons simultaneously for five (5) seconds. If this doesn’t work, here’s the second method. For the first method, press and hold one of the following buttons for five (5) seconds: Stop/Reset, OK, or Resume. There are different ways how to reset the ink counter.
0 kommentar(er)
